CNCW-4848-4Axis Front View
Water Cooled Spindle
CNCW-4848-4Axis Front View
Close up of Rotary
Control Cabinet closed
CNCW-4848-4Axis Front View
CNCW-4848-4Axis Side View
CNCW-4848-4Axis Rear View
CNCW-4848-4Axis Rear View
Another close up of the Rotary
12" Rotary Chuck
Water cooled spindle, Hiwin rails on X Axis
Water cooled spindle, Hiwin rails on X Axis
Front view again!
Control Cabinet
Omron Home sensors-Solid stat-Nothing to wear out!
Optional NC Studio Operating system
Leedshine Stepper Drivers
DSP Operating system
Optional NK103 Operating system
Optional Mach 3 Operating system
Cutting Bit Calibration Sensor
Sample of bits
Sample of Bits
CNCW-4848- 4th Axis.
Products Introduction CNCW-4848-4 Axis with Built in Rotary CNC Router
Specifications:
This is a great machine for changing between flat material and columns. No need to set up and remove the rotary each time youÂ
need to cut. G-code can be loaded to switch between the two seamlessly.
- Solid cast Iron gantry, T-slot table shown, Vacuum and Wet table available, fast speed and high accuracy.
- High-speed water cooling spindle and high performance subdivision driver built to last.
- DSP with USB interface shown , NCStudio and Mach 3 available.
- Sample bits, software, cables and owners manual included. Your ready to go on delivery.
- Machines are pre-checked state side prior to delivery to you.
- Option:Stainless steel water tank is suitable for the processing of hard materials, such as glass, marble and so on.
- Rack & Pinion  transmission with Hiwin Linear square guide rails on X,Y.
Z axis used Ball Screw. Guarantee higher precision and longer life
- Built-in Rotary can handle 7.8″ Diameter, 35″ length material.
Customize this machine:Â Add Rotary Axis sized to your needs, Vacuum Table, Dust Collector, or larger spindle
NEW! Add Auto Tool Changer.
Parameters:
CNC Warehouse Model # |
CNCW-4848 |
Working Area (X*Y*Z) |
1200 X 1000 X 200mm (48 X 39 X 7.75 inch) |
Processing accuracy |
0.01mm |
Repositioning accuracy |
0.05mm |
Spindle |
2.2KW variable speed , water-cooled |
Spindle rotating speed |
0-24000rpm/min |
Max Moving Speed |
25000mm/min |
Working speed |
0-5000mm/min |
Driving mode |
Hiwin linear guideway.
Z Axis used Ballsrew transmission
X,Y Axis Rack & Pinion |
Voltage |
AC240V/60Hz |
Max. Power consumption |
3KW |
Feeding Height |
200mm |
Drive motor |
Stepper |
Command |
G.code , mmg , plt , uoo,HPGL |
Compatible Software |
Type3, Artcut, ArtCAM, masterCAM software |
Rotary |
Max Diameter 7.8", Length 35" |
Pack dimensions |
1400mm X 1400mm X 1600mm wooden trunk |
Net weight |
800KGS / 1,763Lbs |
Option: Vacuum table,dust collector |
|