Description

LB16121 Carbide Tipped Non-Melt Plastic 16 Inch Dia x 120T M-TCG, -2 Deg, 1 Inch Bore

When cutting acrylics and plastics, “chip-welding” – a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

* A soft plastic cardboard made with super soft super flexible PVC.

** A polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.

*** Decorative high-pressure compact laminate (HPL) with an integral surface.

Specifications:

• Tool #LB16121
• Diameter (D) 16 (400mm)
• Teeth: 120
• Bore (d) 1
• Tooth Grind: M-TCG
• Hook Angle: -2
• Kerf (B) .145 (3.7mm)
• Plate (C).118 (3.0mm)