Description

LB12961-30 Carbide Tipped Non-Melt Plastic 12 Inch Dia x 96T M-TCG, -2 Deg, 30mm Bore

When cutting acrylics and plastics, “chip-welding” – a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

* A soft plastic cardboard made with super soft super flexible PVC.

** A polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.

*** Decorative high-pressure compact laminate (HPL) with an integral surface.

Specifications:

• Tool #LB12961-30
• Diameter (D)  12 (300mm)
• Teeth: 96
• Bore (d)  30mm
• Tooth Grind:  M-TCG
• Hook Angle: -2
• Kerf (B) .125 (3.2mm)
• Pinholes: 2/7/42, 2/9/46, 2/10/60
• Plate (C) .102 (2.6mm)