Tel: 281-742-6000 4212 Lockfield st. Houston TX 77092 US

CNCWL-3015-LFC-1KW

CNCWL-3015-LFC-1KW
CNCWL-3015-LFC
CNCWL-3015-LFC-1KW
Optional Transfer Table
CNCWL-3015-LFC-1KW
Control Cabinet
CNCWL-3015-LFC-1KW
Included Chiller
CNCWL-3015-LFC-1KW
Self contained controls, safety door protect the operator
CNCWL-3015-LFC-1KW
Business end of the machine. German
CNCWL-3015-LFC-1KW
Inside the machine

Laser Cutting Machine

  • 5′ X 10′ also 5′ X 13′  Worktable
  • Moveable transfer table
  • Laser source IPG, nLight, Raycus
  • Wattage: 500-6,000 Watt

CNCWL-59119-LFG is a top of the line fiber cutting machine, Built using high strength seamless steel for better rigidity, and utilizing high temperature annealing, Provide a rock solid foundation for years of use.

Accompanied by a 500 – 6,000 watt high quality IPG or Raycus laser source. This system is guaranteed to make your business run smoother an produce product that does not require additional labor and materials to clean.

Extremely low maintenance, your only ongoing expense will be the cutting gases used.

Ball Screw and Servo drive system provides smooth running precise motion for exacting requirements.

CYPCUT Operating system provides an award winning solution to your daily operating needs. Easy to use and full featured.

Specifications

Model

CNCWL-3015

Laser Power

500 –2,000 Watt Fiber Optic

Laser Type Raycus or IPG or nLight
Work Area 59” X 118”
Cooling Type Water-cooled and Protection System(CW-6000 Industrial Chiller)

Control System

CYPCUT

Focus System

Automatically(Only for metals)

X,Y,Z Axis Range 99” X 52” X 4”
Max Moving Speed 20m/min
Laser Output Control 1-100% Software Setting
Smallest Character Engraving English: 1.0X1.0 mm
Laser Beam Quality <0.373mrad
Power Supply AC 220V±10%, 50-60Hz
Operating Temperature 0°-45°C
Operating Humidity 5%-95%
Locating Precision ≤±0.01mm
Supported File Format DSTPLTBMPDXFAI
Compatible Software TAJIMACORELDRAWPHOTOSHOPAUTOCADAll

Type of AUTOCAD Software in cloth

Driving System Japan Yaskawa Servo Electrical Motor

Drive Mode

Rack & Pinion

Machine Dimension 321” X 112” X 84”
Net Weight 9900-11000 Lbs
Whole machine Electrical Usage

9kw

Wave length 1070nm

 

Power consumption under normal use:

  • 500 w  – 10 Kw
  • 1000w – 15.2 Kw
  • 2000w – 20.1 Kw
  • 3000w – 26 Kw
  • 4000w – 27.5 Kw
  • 6000w – 34 Kw

Voltage available 380V, 220V / 3-phase / 60 Hz

 

Features:

  • Theoretical Laser lifetime without maintenance is 100,000 hours
  • Photoelectric conversion rate as high as 25% – 30% saves power
  • Fiber optic system, No mirrors to clean or adjust
  • Laser head auto focus system maintains a high precision focus at all times. No crashes!
  • Rigid structure maintains a solid foundation for years of trouble free machine use.
  • Convenient waist removal drawers
  • Two zone exhaust system to maintain a clean work environment.
  • Built in motorized work platform allows for easy loading of material.
  • Automatic oiling system keeps everything well maintained.
  • Water chiller maintains the laser at the perfect temperature.
  • Optional Accessories: Cutting Cylinder Pipe, Cutting Square Pipe.
 
  500W 1000W 1500 2000W 3000W 4000W 6000W 8000W 10000W 12000W
Material Thickness speed m/min speed m/min speed m/min speed
m/minspeed
m/minspeed
m/minspeed
m/min
speed
m/minspeed
m/minspeed
m/minspeed
m/min
speed m/min speed m/min speed m/min speed m/min speed m/min
Carbon steel
(Q235A)Carbon steel
(Q235A)Carbon steel
(Q235A)Carbon steel
(Q235A)
1 7.0–9.0 8.0–10 15–26 24–30 30–40 33–42 35–42 35–42 35–42 35–42
2 3.0–4.5 4.0–6.5 4.5–7.0 4.7–6.0 4.8–7.5 5.2–8.0 6.0–8.0 6.2–10 7.0–12 10–13
3 1.8–3.0 2.4–3.0 2.6–4.0 3.0–4.8 3.3–5.0 3.5–5.5 3.8–6.5 4.0–7.0 4.2–7.5 4.5–8.0
4 1.3–1.5 2.0–2.4 2.5–3.0 2.8–3.5 3.0–4.2 3.1–4.8 3.5–5.0 3.5–5.5 3.5–5.5 3.5–5.5
5 0.9–1.1 1.5–2.0 2.0–2.5 2.2–3.0 2.6–3.5 2.7–3.6 3.3–4.2 3.3–4.5 3.3–4.5 3.3–4.8
6 0.6–0.9 1.4–1.6 1.6–2.2 1.8–2.6 2.3–3.2 2.5–3.4 2.8–4.0 3.0–4.2 3.0–4.2 3.0–4.2
8   0.8–1.2 1.0–1.4 1.2–1.8 1.8–2.6 2.0–3.0 2.2–3.2 2.5–3.5 2.5–3.5 2.5–3.5
10   0.6–1.0 0.8–1.1 1.1–1.3 1.2–2.0 1.5–2.0 1.8–2.5 2.2–2.7 2.2–2.7 2.2–2.7
12   0.5–0.8 0.7–1.0 0.9–1.2 1.0–1.6 1.2–1.8 1.2–2.0 1.2–2.1 1.2–2.1 1.2–2.1
14     0.5–0.7 0.7–0.8 0.9–1.4 0.9–1.2 1.5–1.8 1.7–1.9 1.7–1.9 1.7–1.9
16       0.6-0.7 0.7–1.0 0.8–1.0 0.8–1.5 0.9–1.7 0.9–1.7 0.9–1.7
18       0.4–0.6 0.6–0.8 0.65–0.9 0.65–0.9 0.65–0.9 0.65–0.9 0.65–0.9
20         0.5–0.8 0.6–0.9 0.6–0.9 0.6–0.9 0.6–0.9 0.6–0.9
22         0.4–0.6 0.5–0.8 0.5–0.8 0.5–0.8 0.5–0.8 0.5–0.8
25           0.3–0.5 0.3–0.5 0.3–0.7 0.3–0.7 0.3–0.7
Stainless steel
(201)Stainless steel
(201)Stainless steel
(201)
1 8.0–13 18–25 20–27 24–30 30–35 32–40 45–55 50–66 60–75 70–85
2 2.4–5.0 7.0–12 8.0–13 9.0–14 13–21 16–28 20–35 30–42 40–55 50–66
3 0.6–0.8 1.8–2.5 3.0–5.0 4.0–6.5 6.0–10 7.0–15 15–24 20–30 27–38 33–45
4   1.2–1.3 1.5–2.4 3.0–4.5 4.0–6.0 5.0–8.0 10–16 14–21 18–25 22–32
5   0.6–0.7 0.7–1.3 1.8-2.5 3.0–5.0 4.0–5.5 8.0–12 12–17 15–22 18–25
6     0.7–1.0 1.2-2.0 2.0–4.0 2.5–4.5 6.0–9.0 8.0–14.0 12–15 15–21
8       0.7-1.0 1.5–2.0 1.6–3.0 4.0–5.0 6.0–8.0 8.0–12.0 10–16
10         0.6–0.8 0.8–1.2 1.8–2.5 3.0–5.0 6.0–8.0 8.0–12
12         0.4–0.6 0.5–0.8 1.2–1.8 1.8–3.0 3.0–5.0 6.0–8.0
14           0.4–0.6 0.6–0.8 1.2–1.8 1.8–3.0 3.0–5.0
20             0.4–0.6 0.6–0.7 1.2–1.8 1.8–3.0
25               0.5–0.6 0.6–0.7 1.2–1.8
30               0.4–0.5 0.5–0.6 0.6–0.7
40                 0.4–0.5 0.5–0.6
Aluminum 1 4.0–5.5 6.0–10 10–20 15–25 25–38 35–40 45–55 50–65 60–75 70–85
2 0.7–1.5 2.8–3.6 5.0–7.0 7–10 10–18 13–25 20–30 25–38 33–45 38–50
3   0.7–1.5 2.0–4.0 4.0–6.0 6.5–8.0 7.0–13 13–18 20–30 25–35 30–40
4     1.0–1.5 2.0–3.0 3.5–5.0 4.0–5.5 10–12 13–18 21–30 25–38
5     0.7–1.0 1.2–1.8 2.5–3.5 3.0–4.5 5.0–8.0 9.0–12 13–20 15–25
6       0.7–1.0 1.5–2.5 2.0–3.5 4.0–6.0 4.5–8.0 9.0–12 13–18
8       0.6–0.8 0.7–1.0 0.9–1.6 2.0–3.0 4.0–6.0 4.5–8.0 9.0–12
10         0.4–0.7 0.6–1.5 1.0–2.0 2.2–3.0 4.0–6.0 4.5–8.0
12         0.3-0.45 0.4–0.6 0.8–1.4 1.5–2.0 2.2–3.0 4.0–6.0
16           0.3–0.4 0.6–0.8 1.0–1.6 1.5–2.0 2.2–3.0
20             0.5–0.7 0.7–1.0 1.0–1.6 1.5–2.0
25               0.5–0.7 0.7–1.0 1.0–1.6
35                 0.5–0.7 0.7–1.0
Brass 1 4.0–5.5 6.0–10 8.0–13 10–16 20–35 25–30 45–55 55–65 65–75 75–85
2 0.5–1.0 2.8–3.6 3.0–4.5 4.5–7.5 6.0–10 8.0–12 25–30 30–40 33–45 38–50
3   0.5–1.0 1.5–2.5 2.5–4.0 4.0–6.0 5.0–6.5 12–18 20–30 25–40 30–50
4     1.0–1.6 1.5–2.0 3.0-5.0 3.2–5.5 8.0–10 10–18 15–24 25–33
5     0.5–0.7 0.9–1.2 1.5–2.0 2.0–3.0 4.5–6.0 7.0–9.0 9.0–15 15–24
6       0.4–0.7 1.0–1.8 1.4–2.0 3.0–4.5 4.5–6.5 7.0–9.0 9.0–15
8         0.5–0.7 0.7–1.0 1.6–2.2 2.4–4.0 4.5–6.5 7.0–9.0
10           0.2–0.4 0.8–1.2 1.5–2.2 2.4–4.0 4.5–6.5
12             0.2–0.4 0.8–1.5 1.5–2.2 2.4–4.0
14               0.4–0.6 0.6–0.8 0.8–1.5
Note: This table data for reference only!
1, different optical fiber, material quality, gas, optical lenses, cutting graphics, etc., will affect the cutting speed, need to be adjusted according to site conditions;
2, the yellow part is nitrogen (pure nitrogen) cutting, the blue part is oxygen (pure oxygen) cutting;
3, laser cutting in the processing of the limited material efficiency is low and the effect will be reduced, can not be continuous processing;
4, for copper and aluminum contour cutting materials need to pay attention to adjust the process, do not recommend continuous processing for a long time.